Temosonline
>
Automations
>
Swing Gates
>
Swing Gate Opener for swing gates up to 2m each leaf - BETA400

-30%

Swing Gate Opener for swing gates up to 2m each leaf - BETA400

Swing Gate Opener for swing gates up to 2m each leaf - BETA400

Swing Gate Opener for swing gates up to 2m each leaf.

Limited time offer:

€292.60 (tax incl.) €418.00

Description

Kit components:

2 Motors 400mm / 230V motors for gate leaves up to length 2m
1 Logic board – Built-in receiver
2 Remote controls with 4 buttons
1 External safety photocells kit
Installation support accessories

Installation manual included

Product Details

Reference TO644001

Installation instructions

Manual BETA400_pt

Download (1016.56k)

Manual BETA400_es

Download (1.01M)

Anleitung BETA400_de

Download (1.04M)

Manual BETA400_en

Download (1011.83k)

Brand:

Control board Motorline for swing gates motors...

€137.50 (tax incl.)

Universal LED flashing lamp - MP105

€19.00 (tax incl.)

Is it difficult to install an automation?

The installation of most engines is very simple, you will need to r some tools, most probably , have in your house.

The automation control unit is sent as prepared as possible, only in some cases it may be necessary to program the door 's shut-offs in order for the engine to adapt to its shape, sensitivity and strength to be exercised , but do not worry , the installation manuals are very clear and our technicians are helping you if you need them and , in some products, we have videos demonstrating how to install .

What is a limit switch?

The limit switch is an electromechanical device that is used in the installation of gates to indicate to the engine the stopping point in the opening and closing of the gate.

Which motor is the most suitable?

It is always advisable to choose an engine that has superior strength, since the gate drive conditions are not always the same, depends on the hardness of the course, the effort required to start moving it, etc.

A swing gate is the size of sheet to be taken into account, as well as the wind hitting against the sheet exerting a counterforce.

And if the electricity fails?

All engines have the possibility of manual opening and, in the case of a 24 Vdc motor, have a backup battery that allows the engine to work without electricity on average 20 more maneuvers.

I have an old motor and I want to replace it. The electronic central and remote controls I have are currently compatible with your motor?

Usually all engines are compatible with most electronic plants and vice versa, if you still have questions, you can send us pictures of your current installation, so we can recommend exactly if you can use the old material with new or you need to change any of the components.

How to install a swing gate motor?

The motors should be placed at the gate respecting their quotas installation (check installation manual for this step is very important). To fix the engine back can opt for the screwing or welding, according to the pillar of the material. The front end must be fastened to the door leaf, also welding or bolting, as preferred, using the motor mounting brackets. After that, just connect the motor to the electronic central and make the programming of the end-of-course.

12 other products in the same category:

Swing Gate Opener for swing gates up to 2m each leaf - BETA400

Menu

My account

Search

Share